Own specialized vehicles for the transportation of hazardous goods and waste

Enables reliable transportation of waste from the customer to the facility. Complies with international safety, occupational health and environmental requirements; a certificate of approval for the carriage of dangerous goods (ADR Certificate) is available.

Forklifts deliver the waste to specially designated areas in the facility and then to the location where it is processed.

Power shredders (industrial power shredders DR 90602, K7-FI2-S)

The power shredder consists of a cutting mechanism and a drive.

The cutting mechanism is a cast-iron housing with stationary knives secured in it by bolts, with the knife rotor shaft rotating in their bearing supports.

The feedstock enters between the stationary and rotating knives of the cutting mechanism, is shredded and, as it is processed, is fed to the shredder's discharge hatch.

GPO-2 Industrial Waste Baler

It has a pressing force of 12 tons and is designed for baling (compacting) recyclable materials. This high-performance equipment is specially designed for efficient formation of bales from:

various types of waste paper;
cardboard packaging;
paper and archives;
polyethylene film;
PET bottles;
all types of plastic containers;
leather;
textiles and other household and industrial waste.

After pressing, the finished bales are secured with polypropylene strapping, wire, or other materials.

Special technological acid neutralization unit

Designed for the physicochemical treatment, stabilization, and neutralization of industrial solutions. The process of neutralizing acids, their mixtures, and solutions is based on a chemical reaction with alkalis or metal oxides (for acids and strong acid solutions). The reaction produces salt and water. The reaction is accompanied by heat release (exothermic)

Capacity of the pressurized distribution tank: 0.3 m3/300 l

Volume of the neutralization tank: 3.25 m

Overall dimensions of the neutralization tank (length x width x height): 3000x950x1200 mm

Maximum acid flow rate through the distribution device: 300 l/h

Minimum acid flow rate through the distribution device: 30 l/h.

Weight of the pressurized distribution tank (excluding the acid being filled): 40 kg

Weight of the neutralization tank (without reagents): 850 kg

Capacity: 2178 l/year

UT 3000DTS Waste Thermal Destruction Unit with a Multi-Line Flue Gas Cleaning System

The thermal waste disposal unit is designed to eliminate waste of various origins and compositions by incineration.

The operating process consists of
the following stages:

Removal of ash from the combustion chambers and preparation for operation;
Furnace preheating;
Waste loading;
Waste incineration;
Combustion of furnace gases and their purification;
Shutdown and cooling of the thermal disposal unit.

Usable combustion chamber volume: 2, 6 m3
Afterburning chamber: 5.0 m3
Chimney height: 37000 mm
Height from “0”: 4600 mm
Operating temperature (combustion and afterburning): 850-1100 °С
Ash hatch: available
Forced ventilation of the combustion and afterburning chambers: yes
Loading hatch: yes
Hatch opening: automatic
Incineration rate: 500 kg/h
Liquid waste incineration rate: 200 kg/h
Gas purification: yes
Incineration unit capacity: 5000 t/year

Capacities TOV “DSL-2010”